carbide roller
Carbide rollers possess good thermal conduction property. Compared with other materials, it is much better in terms of heat-resistance, wear-resistance and strength
Features of carbide roller
Great Performance
Compared with other materials, it is much better in terms of heat-resistance, wear-resistance and strength.
high speed wire rod mill
What's more, its hardness reduces a little under the condition of high temperature. So, the cemented carbide roll rings is invented with the appearance of high speed wire rod mill.
Widely Used
With the development and improvement, it is widely applied in the production of high-speed wire, bar and deformed steel bar.
At present, the finishing mill is generally composed of 8-10 stands. Because of the big size of fracture surface of rolled part, the collar on the front stands of finishing mill may resist heavy duty and strong impact. Thus, the high hardness and good thermal fatigue resistance are the primary factors, which are prior to wear resistance. While there is low load and impact for the rear stands, we shall pay more attention to the wear-resistance and thermal fatigue resistance of roll rings.
Dimensions and precision of finished carbide roll rings
External diameter (mm) | lnner diameter (mm) | height (mm) |
145-480 | 87-280 | 20-150 |
Carbide Rolls
Tolerances allowable for the O.D.,I and height of roll rings：
Carbide Rolls
| precision class | External diameter≤200mm | |
| Better | Ordinary | |
| Out diameter | ±0.02 | ±0.05 |
| lnner diameter | 0.02 | 0.035 |
| height | ±0.025 | ±0.10 |
| External diameter>200mm | ||
| Better | Ordinary | |
| Out diameter | ±0.03 | ±0.05 |
| lnner diameter | 0.025 | 0.05 |
| height | ±0.05 | ±0.10 |
| Special requirements | ||
The allowable deviation of carbide roll rings:
Radial runout of groove ≤0.013mm
Radial runout of periphery≤0.013mm
End face runout≤0.02mm
End face planeness≤0.01mm
End face parallelism≤0.01 mm
Inner hole cylindericity ≤0.01mm
Roughness of carbide rolls:
inner hole roughness 0.4μm
periphery roughness 0.8 μm
end face roughness 0.4μm
Get in touch